Philips TSU9200-37 - Manual (Page 8)

8
Preparing for Configuration
3 Preparing for Configuration
3.1 Inserting the Battery
To insert the battery:
1 Place the battery in the battery compartment, making sure to match the contacts of the
battery to the contacts of the Remote Control.
2
Click the battery into place.
3
Position the cover and press firmly until you hear a click.
3.2 Charging the Control Panel
It is advised to charge the Remote Control to its maximum before you start configuring it.
This can take 3 to 4 hours.
D Note
The Remote Control always functions when it is placed in the docking station.
Place the Remote Control in the docking station.
A
red Charging LED on the front of the docking station lights up while the Remote
Control is charging. When the Charging LED fades out, the Remote Control is fully
charged.