Philips TSU9200-37 - Manual (Page 13)

To add codes to MyDatabase:
In the Factory Database, search the device, based on its model number and add it to
MyDatabase via the button .
-or-
Learn the codes from the original Remote Control of the A/V component in
MyDatabase.
1 Connect the Remote Control to the PC with the USB cable.
2 Place the original remote 10-15 cm (4 to 6 inches) from the Remote Control in line
with its learning eye. Check if both batteries are sufficiently charged.
3
Press and hold the key of the original remote for at least 1 second.
E Tip
With the Remote Control connected to the PC, you can test newly added codes via
the Manage MyDatabase application. Press
Test IR. The code will be sent to the A/V
equipment.
5.3 Advanced Editing
To create an Advanced Configuration, click Advanced in the activity screen (step 3 of the
wizard). There you can add, delete and modify ‘more functions’ and reassign hard buttons to
different functions or macros. Please refer to the Configuration Program’s Online Help for
more details.
EN
G
LI
SH
13
Doing More with the Configuration