Philips CCX252AT99 - Manual (Page 7)

Hooking Up the TV/VCR (cont’d) 7
AUDIO POWER STOP REW PLAY F.FWD REC/OTR VOLUME CHANNEL EARPHONE EJECT REC
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO ANT.
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO
ANT.
VIDEO AUDIO
• Before connecting the rod antenna or coaxial cable to the ANT(enna) Jack, make sure the pin is not bent. If
the pin is bent, straighten it as illustrated, then connect it to the ANT(enna) Jack.
• A rod antenna (not supplied) is available from Philips Service Company. The part number is 4835 303 37006.
To order, call 1-800-851-8885.
• Audio and video cables are not supplied.
Helpful Hints
Crooked Pin Straight Pin
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Camcorder)
You may need this connection
if you want to copy tapes.
Details are on page 31.
AUDIO/VIDEO Jacks
on front of TV/VCR
AUDIO/VIDEO OUT
Jacks on VCR
Use an Audio cable to connect the AUDIO
OUT Jack on the VCR to the AUDIO (In)
Jack on the front of the TV/VCR.
Use a Video cable to connect the VIDEO OUT Jack on
the VCR to the VIDEO (In) Jack on the front of the
2
Plug in the TV/VCR.
3
Before you turn on the TV/VCR, go to page eight.
D.