Philips CCX252AT99 - Manual (Page 37)

Setting the Sleep Timer 37
Use the sleep timer to program the TV/VCR to shut off in a cer-
tain amount of time.
1
Press the SLEEP button. The sleep timer display will appear
on-screen. (You can not set the sleep timer during a recording.)
1-2
• You can start a recording after the
sleep timer is set. If the recording
finishes before the TV/VCR shuts
itself off, the TV/VCR will shut itself
off as programmed with the sleep
timer. If a recording is in progress,
the programmed sleep timer will be
cancelled.
• A timer recording will not begin
until after the TV/VCR shuts itself
off. Two minutes before a timer
recording starts, PLEASE TURN OFF
FOR TIMER RECORDING flashes
on-screen. If you see this message,
turn off the TV/VCR.
• If the power fails, you might lose
the sleep timer setting.
Helpful Hints
SLEEP 10 SEC
GOOD NIGHT
SLEEP 0 MIN
2
Within five seconds, press the SLEEP button repeatedly
to select 30 minutes, 60 minutes, 90 minutes, or 120 min-
utes. In a few seconds, the display will disappear. Then the
TV/VCR will shut itself off after the specified amount of time.
One minute before the TV/VCR shuts itself off, the seconds will
count down on-screen.
GOOD NIGHT appears on the TV/VCR screen 10 seconds
before the TV/VCR shuts itself off.
● To see how much time remains until the TV/VCR shuts itself
off, press the SLEEP button once. The time remaining will
appear on-screen briefly. You cannot do this during a recording.
● To cancel a sleep timer setting, press the SLEEP button until 0
MIN appears on-screen. The on-screen display will disappear in
a few seconds. You cannot cancel it during a recording.
REW
PLAY
POWER
SPEED MUTE
SLEEP
ALT.CH
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY PAUSE/STILL
MENU CLEAR
TRACKING
STOP
F.FWD – +
o
o
p
p
o
p
o
p
1 2 3
4 5 6
7 8 9
0 +100