Philips SYUSA013MENGRCO - Manual (Page 39)

ENGLISH
• 39 •
manufacturer.
• In the programming mode, press ∧∧∧∧∧” or “∨∨∨∨∨”
to select the function:
FACTOR. SETTINGS
and then enable it by pressing “ENT”. At this
point the machine will display:
FACTOR. SETTINGS
NO
• Choose whether to restore the factory settings
by pressing “ ∧∧∧∧∧” or “∨∨∨∨∨” and then press “ENT”
to confirm your choice.
Important: when the factory-set
default parameters are restored, all
custom settings made in the machine will
be lost.
13 LEGAL INFORMATION
• This instruction book contains the information
you need in order to use and care for your
appliance correctly.
• The information should be viewed as a
guideline for using and maintaining your
coffee machine in safety. The information is
not exhaustive. For additional information or
for information on topics not covered or
inadequately covered in this instruction book,
please contact an authorized service centre
or the manufacturer directly.
• In addition, it should be noted that these
instructions do not form part of a previous or
existing agreement, legal contract or similar
and that the information is not changed by
any other document.
• All the manufacturer’s obligations and
liabilities are based on the contract of sale,
which also specifies all the warranty terms and
conditions.
• The warranty terms and conditions are neither
limited nor extended on the basis of this
instruction book.
• This instruction book contains information
protected by copyright.
• This instruction book may not be photocopied
or translated into other languages without
the explicit written consent of the
manufacturer.
14 SCRAPPING
• Appliances no longer in use should be
rendered unusable.
• Detach the plug from the wall outlet and cut
the electric cord.
• Deliver scrapped appliances to a suitable
waste disposal facility.
15 DISPLAY INDICATIONS
The display guides users and helps them to use the
machine properly.
Below is a description of alarm messages that
disable the brew unit and an explanation of what
the user must do in order to use the machine
properly.
ENERGY
SAVING
• Press the button (27).
DESCALING
READY FOR USE
• Descale the machine (see Chap.11)
FILL WATERTANK
• Fill the water tank (9) with fresh drinking water.
COF. BEANS EMPTY
READY FOR USE
• Fill the coffee bean container with coffee beans
and restart the coffee brewing cycle.
DREGDRAWER FULL
• Remove the dregs drawer (10) and empty the
used coffee grounds into a suitable container.
Important note: the dregs drawer
may be emptied only when the
machine is on. The drawer must be taken