Philips DCD778-37B - Manual (Page 20)

20
English
TV Menu Operation
Using the TV menu
This TV menu enables you to access the
advanced TV features or setup options.
1
In TV mode, press SYSTEM MENU.
➜ The TV menu will appear.
2
Press 3 or 4 on the remote to select the
desired menu page: Channel or Setup.
3
Press á to enter the selected menu page.
4
Press 3 or 4 on the remote to highlight an
option.
5
To access an option, press á.
If sub-options are available, press á repeatedly
until the desired appears.
If sub-menu needs navigation, use а / б to
select, then press OK to confirm.
To return to the upper-level menu
● Press QUIT (in cases of value adjustment).
To remove the menu
● Press SYSTEM MENU to exit the menu.
Channel Page
The options included in Channel page are “TV
Input”, “TV Source”, “Auto Program”, and
“Erase/Write”.
Setting up TV
Set up your TV for the cable or air reception.
1
In the Channel page, when TV Input is
highlighted, press
á once or more to select
Digital TV or Analog TV.
2
In the Channel page, when TV Source is
highlighted, press
á repeatedly to select AIR,
STD, HRC or IRC.
● To receive the cable channels, select STD, HRC
or IRC.
●
To receive air channels, select AIR.
Helpful hints:
– To receive the cable channels, you must connect
your TV to the cable TV outlet using a CATV cable
(not supplied).
Auto Program
Auto search and store all the available digital or
analog channels.
1
When Auto Program is highlighted, press á to
enter its sub-option.
The following message will appear “ Do you
really want to do it ?”.
2
Use à / áto select “Yes” or “No”, then press
OK to confirm.
➜
If “Yes” is confirmed, the TV will start to
search all available DTV or ATV channels.
pg018-pg035_DCD778_37-EngB 9/2/07, 18:50 20