Philips DCD778-37B - Manual (Page 17)

English
17
Basic functions
Switching on/ to standby and
selecting functions
1
To switch on, press B, or press SOURCE, or
iPod
(or DISC/TUNER, iPod/AV, or DTV/
ATV on the remote control).
➜
The system will switch on the last selected
source.
2
To select your function, press SOURCE or iPod
once or more (or DISC/TUNER, iPod/AV, or
DTV/ATV
on the remote control).
3
Press B to switch the set to standby.
Helpful hints:
– In the standby mode, the tone, sound settings,
tuner presets, and the volume level (up to a
maximum volume level of 20) will be retained in
the set’s memory.
Adjusting volume and sound
Adjusting Volume
● Press VOL +/- to adjust the volume.
➜ Display shows VOLUME and. a number from
00 to 32.
DSC
D igital Sound Control enables you to select
predefined sound settings.
● Press DSC repeatedly to select your desired
sound setting:
➜
CLASSIC, POP, MOVIE or SPEECH is
displayed.
MUTE
During playback, you can temporarily switch off
the sound without switching off the set.
1
Press MUTE to switch off the sound.
➜
MUTE appears on the TV screen .
Playback continues without sound.
2
To switch on the sound, press MUTE again or
adjust the volume with VOL controls.
Display information
● During playback, press DISPLAY to switch
between the clock/timer display and the status of
the set (or on the remote control, INFO /
DISPLAY
).
Adjusting picture
On the TV screen, you can adjust your picture
settings: Brightness, Contrast, Color and Tint.
Adjusting picture
On the TV screen, you can adjust your picture
settings: Brightness, Contrast, Color and Tint.
1
On the remote control, press PICTURE once
or more to select BRIGHTNESS, CONTRAST,
COLOR and TINT.
2
Press VOL +/- to adjust the value between 00
and 32.
pg001-pg017_DCD778_37-EngA 9/2/07, 18:50 17