Philips 55PL9774-37B - Manual (Page 56)

56
If you live near a television station’s transmit-
ter tower, you may receive an interfering sig-
nal from the station while watching other TV
channels. Your television’s Antenna
Attenuator control is designed to reduce the
strength of such a signal in the presence of a
strong main signal. The default setting for the
Antenna Attenuator is “Off.” If you need to
use the feature, simply toggle it “On” in the
on-screen menu. The setting you make
applies to the channel you are currently
watching and will remain in place until you
change the setting.
1 Press the Menu button on the remote
control to display the on-screen menu.
2 Press the Cursor Right button repeat-
edly to select “Channels.”
3 Press the Cursor Down button repeat-
edly to select the “Antenna attenuator”
control.
4 Press the Cursor Right button to toggle
the control “On” or “Off.”
5 Press the Menu button to remove the
on-screen menu from the TV screen.
Turning the Antenna Attenuator on or off
®
®
® ®
SAP CONTROL
ACTIVE
CLOCK
AV+
MUTE
PIP
SCREEN
FORMAT SURF
TV SURR HD
INFO SELECT PIXEL PLUS
CC
Channels
TV
Channel list
Channel lock
Lock after
TV ratings lock
Channels
TV
Movie ratings lock
Channel remove
Antenna attenuator Off • On
Channels
TV
Movie ratings lock
Channel remove
Antenna attenuator On • Off
1
5
2
4
Picture Sound Features Channels
TV
Settings
Demo
Install
OR
3
CH