Philips HTS5500C-37B - Manual (Page 33)

English
33
3139 115 14781
DVD Setup Menu Options
(continued)
TIPS: The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP.
Program tracks on a single disc
(for CD, VCD, SVCD, DVD only)
You can program the tracks in the
current selected disc in the order you
want them to be played. Up to 20 tracks
can be stored. You can press PROG to
enter into program menu directly.
OR
1
In ‘GENERAL SETUP PAGE,’ press 34 to
highlight { PROGRAM, } then press
2.
2
Press
34 to select { FTS } (Favorite
Track Selection) and press OK to
confirm.
2
6
7
8
9
10
To input your favorite tracks/chapter
3
Use the numeric keypad (0-9) to enter
a valid track/chapter number.
4
Use 1 2 3 4 keys to move the cursor to
the next position.
➜
If the total program tracks are more
than ten, press
T to open the next
page and proceed with programming or,
➜ Use 1 2 3 4 keys to highlight
{ NEXT } on the program menu, then
press OK.
5
Repeat steps
3
~
4
to input another
track/chapter number.
If you want to remove a track
6
Select the track/chapter number and
press OK to remove this track/chapter
from the program menu.
To start program playback
7
Use 1 2 3 4 keys to highlight { START }
on the program menu, then press OK.
To exit program playback
8
Use 1 2 3 4 keys to highlight { EXIT }
on the program menu, then press OK.
Program discs
You can program the discs sequence in
the order you want them to be played.
Up to 5 discs can be stored.
1
In ‘GENERAL SETUP PAGE,’ press
34 to
highlight { PROGRAM, } then press
2.
2
Press
34 to select { FDS } (Favorite
Disc Selection) and press OK to confirm.
(1) Disc : 3
(2) Disc : 5
(3) Disc : 1
(4) Disc : 4
(5) Disc : 2
To input your favorite disc
3
Use the numeric keypad (0-9) to enter
a valid disc number (1-5).
4
Use 1 2 3 4 keys to move the cursor to
the next position.
5
Repeat steps
3
~
4
to input another disc
number.
If you want to remove a disc
6
Move to the disc number and press
numeric keypad ‘0’ to remove this disc
from the program menu.
To start program playback
7
Use 1 2 3 4 keys to highlight { START }
on the program menu, then press OK.
To exit program playback
8
Use 1 2 3 4 keys to highlight { EXIT }
on the program menu, then press OK.
001-053-hts5500-37-Eng47 13/04/05, 4:14 PM 33