Philips CDR778BK99 - Manual (Page 16)

English
22
For recording from CD changers always use
REC EXT
DISC.
The CD-SYNC feature enables you to make fast and easy
recordings of a CD. Track increments are automatically
detected from the source material. Track increments cannot
be added manually. In analog source material a silence of 2.7
seconds or more is automatically detected as a track
increment.
Preparing for autostart recording
1 Make sure the disc is absolutely free of scratches and dust
particles.
2 Press EXT(ernal) SOURCE repeatedly until (depending on the
digital connection used):
➜ DIGITAL I, OPTICAL I or ANALOG lights up and
DIGITAL 1, OPTICAL or ANALOG appears on the
display.
3 With the CD recorder stopped, press RECORDING-TYPE
four times:
if you wish to record a complete disc or program.
➜
and SYNC start to flash and the display shows
REC
EXT DISCand WAIT followed by the track number,
the total remaining time and
START SOURCE.
• If input label (DIGITAL I) flashes, the digital connection is
incorrect.
Start autostart recording
1 To start recording, press PLAY on the selected source.
➜ The CD recorder automatically starts to record and
lights continuously. The track number and track time
appear on the display.
• If, however, you start the source during a track, CD-SYNC
recording starts at the beginning of the next track or after
2.7 seconds of silence in analog recordings.
• To check the remaining recording time on the CDR(W), press
DISPLAY. (This can also be done during recording)
• The EASY JOG/ENTER key can be used to adjust the
recording level.
• The recorder stops automatically.
2 To stop recording manually, press STOP on the CD recorder.
➜ UPDATE lights up and
SYNC and go out.
• If STOP
9 was pressed within 3 seconds after pressing
PLAY, no recording will take place.
• To interrupt recording, press PAUSE on the CD recorder.
➜
starts to flash. (Autostart recording is disabled.) To
resume, press RECORDING-RECORD on the CD recorder.
After recording the display will show
UPDATE for several
seconds.
Note:
- Recordings from DAT, DCC or analog sources will only stop
after 20 seconds silence.
- Auto track is always active.
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
For recording from CD changers always use
REC EXT
DISC.
REM TRACK REC TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
CHANGER
SYNC MANUAL RECORD
REM TOTAL
ALL
TRACK
TIME STEP TRACK
CD
RW
REM TRACK REC TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
CHANGER
SYNC MANUAL RECORD
REM TOTAL
ALL
TRACK
TIME STEP TRACK
CD
RW
CDR
AUDIO CD PLAYBACK
ERASE EXT SOURCE
OPEN/CLOSE PLAY/PAUSE STOP FINALIZE TYPE
RECORDING
RECORD
DJ MODE REPEAT SCROLL DISPLAY SHUFFLE PROG
Autostart recording from external CD player
CD-SYNC
RECORDING