Philips CDR778BK99 - Manual (Page 14)

English
20
During Listen mode recording you listen to the recording
while you are making it.
Preparing for Listen mode recording
1 Make sure that the recording disc is absolutely free of
scratches and dust particles.
2 For recording, press RECORDING-TYPE twice:
➜ the display first shows the selection.
the RECORD label starts blinking. After 3 seconds
the display shows the remaining CDR(W) recording time
on the left and total time of source on the right. (every 2
seconds
PRESS RECORD is displayed) The left
selection indicator is lit.
• If DOES NOT FIT appears on the display, there is not
enough recording space left on the CDR(W) disc.
You can press RECORDING-RECORD: only complete tracks
that still fit on the CDR(W) will recorded.
or
You can press PROG to select one or more tracks for
recording (see programming):
- rotate the EASY JOG/ENTER key to the required track
number, then press the key (or ENTER on the remote
control)
or
- directly select the track number via the 10-keypad on the
remote control then press the ENTER key to confirm your
selection and go to the next step.
3 Play the source first to set the optimal recording level on
the CD recorder.
4 Rotate the EASY JOG/ENTER key until, on the Record/Play
Level bar, all the blue segments are alight, but the red
segments do not light continuously during the loudest
passages.
➜ Display shows _XX DB (Decibel, e.g. -3DB).
5 Stop the source.
Start Listen mode recording
1 To start recording, press RECORDING-RECORD.
➜ WAIT lights up. RECORD lights continuously and
the selected track or program is copied at normal speed.
The track number and the recording time left will appear.
• To check the track time, press DISPLAY. This can be done
during recording.
• Recording will stop automatically.
Note: Copy prohibited tracks will be copied analog.
ANALOG
REC is displayed.
2 To stop recording, press STOP.
➜ UPDATE lights up, RECORD goes out and
recording stops. (Minimal track length must be 4 seconds
otherwise silence will be added to the track.)
• If STOP was pressed within 3 seconds after RECORD, no
recording will take place.
After recording, the display shows
UPDATE for several
seconds. The Total time indications can differ slightly.
However, no music information is lost.
Note: In this Recording mode, the Pause function is not
operative.
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
REM TRACK REC TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I CD
RW
CHANGER
SYNC MANUAL
REM TOTAL
ALL
TRACK
TIME STEP TRACK
CD
RW
RECORD
REM TRACK REC TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I CD
RW
CHANGER
SYNC MANUAL
REM TOTAL
ALL
TRACK
TIME STEP TRACK
CD
RW
RECORD
REM TRACK REC TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I CD
RW
CHANGER
SYNC MANUAL
REM TOTAL
ALL
TRACK
TIME STEP TRACK
CD
RW
RECORD
CDR
AUDIO CD PLAYBACK
ERASE EXT SOURCE TYPE
RECORDING
RECORD
OPEN/CLOSE PLAY/PAUSE STOP FINALIZE
DJ MODE REPEAT SCROLL DISPLAY SHUFFLE PROG
EASY JOG
CD
AUDIO CD PLAYBACK
ENTER
STORE/MENU CANCEL/DELETE PLAY/PAUSE STOP OPEN/CLOSE
Listen mode recording from internal CD player
RECORDING