Philips HSB2351-F7B - Manual (Page 13)

14
a Connect an HDMI cable (not supplied)
to:
- the • HDMI socket on this unit.
- the HDMI input socket on the TV. •
Tip
If your TV has only a DVI connection, connect through •
a HDMI/DVI adaptor. An extra audio connection is
needed to complete this connection.
Option 3: Connect through
component - Higher quality
Component video provides better picture
quality than AV out connections.Though
component video supports high-defi nition
signals, picture quality is lower than HDMI and
is analogue.
TV
HDMI IN
1
Connect one end of the AV cable (red/
white/yellow) to the AV input sockets on
the TV.
2
Connect the other end to the AV OUT
(VIDEO , AUDIO L/R) sockets on the unit.
Note
If you want to listen to sound from the unit instead of •
from TV, connect the video cable (yellow) only. Do not
connect the audio cable (red and white).
Option 2: Connect through HDMI -
Highest quality
If you want to experience full high-defi nition
video, use HDMI connection. HDMI provides an
uncompressed, digital interface between your
TV and the unit. Both audio and video signals
are combined in one HDMI cable.
Note
To use Philips EasyLink, you must use HDMI connection •
(see “Use Phlips EasyLink”).
This unit is HDMI CEC compatible. It enables the
•
connected TV/device to control each other over HDMI.
TV
VIDEO IN
EN