Philips NP1100-37 - Manual (Page 8)

Create a wireless connection to your home network with
broadband Internet access
Press 34 to select [ Wireless], then press
2 .
Press
2
to start searching for your home network.
Press
34
to select your home network with wireless broadband Internet access,
then press
2
.
Select [ Automatic] > (Enable Proxy?) [no (default)].
The NP1100 displays a confirmation screen that the settings are saved.
Here is how to create a wireless connection any time ‘after’ the initial setup:
Ensure that your wireless access point or wireless router is turned on and connected
to broadband Internet.
Ensure that the NP1100 is turned on and connected to the wireless access point or
wireless router.
on the NP1100, configure the network:
Press
HOME .
Press
34
, then to select [ Settings] > [network setup] > [Wireless] > [Search
for networks].
Press 34 , then to select network.
Enter encryption key (if required).
1
2
3
4
>
1
2
3
4
5
6
•
C
note For details on how to create wired connection, refer to the User Manual.
np1100_qsg_01eng.indd 6 2008-04-28 9:13:45 PM