BT 210 User Manual

Page 42

Tone is the default setting for the UK.

You should only have to change this if

connected to a switchboard that

requires Pulse dialling.

4. Enter the existing PIN code using the keypad and press

New PIN

is displayed.

5. Enter a new 4 digit PIN code using the keypad and press

Repeat PIN

is displayed.

6. Re-enter the new PIN code and press

Saved

is displayed.

7. Press and hold

to return to standby.

Dial mode

Your BT Freestyle 210 is pre-set to tone dialling (DTMF).
You can set the dial mode to pulse dialling if your
switchboard requires.

1. Press

to open the main menu.

2. Press

until the display shows

Setup base

and

press .

3. Press

until the display shows

Dial mode

and press

to select.

4. Press

to display either

DTMF

Pulse

and press

. You hear a confirmation tone and

Saved

is displayed.

5. Press and hold

to return to standby.

Clr

Base settings

BT Freestyle 210 – Issue 02 Ed 1 – 02.01.07 – 7971

If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]