Buffalo Technology WBR2-G54 - Manual (Page 48)

48
IP address of DMZ - Allows administrator to set the DMZ (De-Militarized Zone) address. Incoming
packets containing no recognizable destination port information will be re di rect ed to the DMZ’s IP
address.
Display/Delete NAT Table - Allows ad min is tra tor to delete NAT tables.
Add NAT Table
Group - Specify a group (up to 16 characters) that the NAT rule belongs. Groups are simply used
to visually organize the NAT
table for the administrator. It
is recommended to name the
group after the protocol that is
being setup (e.g. Group Name
FTP when setting up address
translation for FTP)
Click New Group to create
new group or select an existing
group to add a NAT rule to it.
IP address of WAN - Select
AirStation’s IP address of WAN or Manual setting. For Manual setting, enter the IP address
used by the WAN computer to connect to the local computer.
AirStation’s IP address of WAN should be used unless you have multiple WAN side IP
addresses.
Advanced Settings
Address
Translation
Setup