Installation / setup – Buffalo Technology WBR2-G54 User Manual

Page 12

you to combine and share wired and wireless computers and printers with the high-speed internet

connection.

1. Power down the cable or DSL modem and the computer which will be used to conﬁgure the

AirStation router.

2. Plug the cable or DSL’s LAN Ethernet cable into the AirStation’s WAN port. Initially, you may

need to unplug this cable from your computer, hub or other router.

3. Plug the provided Ethernet cable into a LAN port on the AirStation and plug the other end into

your computer Ethernet adapter’s (NIC) port. If you plan to initially conﬁgure the AirStation via a

wireless connection, (not recommended), you may skip this step.

4. Power on your cable or DSL modem, wait one full minute, Power on the AirStation router, wait

another full minute and then power on the computer which will be used to conﬁgure the AirSta-

tion. If the red DIAG light on the AirStation is lit or ﬂashing after several minutes of being pow-

ered on, please consult Buffalo Technical Support.

Installation / Setup