BT RESPONSE75 - Manual (Page 21)

Response 75 – Edition 7 – 26th October ’00 – 3370
19
You can now playback, and access
various other remote functions using
the phones keypad, as follows:
Menu for remote access
To repeat current message
During message playback:
KEYPAD
Press the 4 button.
To delete the current message
During message playback:
KEYPAD
Press the 5 button.
Your Response 75 will
announce “Message deleted”.
To delete all messages
When you hear “End of
messages”
, within 8 seconds,
KEYPAD
press 5 on your keypad.
Your Response 75 will
announce “All messages deleted”.
To stop/cancel a command
During message playback:
KEYPAD
Press the 0 button. Your
Response 75 will give 2 beeps.
To replay all messages
When you hear “End of
messages”
, within 8 seconds,
KEYPAD press 2 on your keypad.
To skip backwards to the
previous message
During message playback:
KEYPAD
Press the 4 button twice to skip
back to the previous message,
or three times to move back 2
messages, etc.
To skip forwards to the next
message
During message playback:
KEYPAD
Press the 6 button.
You can move forward two
messages by pressing the 6
button twice, move forward 3
messages by pressing it 3 times,
and so on.
Please note
If the memory is full, you will have to
delete some messages before your
Response 75 will switch to ‘answer on’
mode.
After you hear the ‘memory full’
announcement, you have 8 seconds to
enter your security code. You can then
delete messages, see ‘To delete messages’,
page 19.