Behringer EURODESK SX2442FX - Manual (Page 16)

EURODESK SX3242FX/SX2442FX
Specifications 16
Specifications 7.
Mono inputs
Microphone inputs (XENYX Mic preamp)
Type XLR connector, electronically balanced,
discrete input circuit
Mic E.I.N. 1 (20 Hz - 20 kHz)
@ 0 Ω source resistance -134 dB / 135.7 dB A-weighted
@ 50 Ω source resistance -131 dB / 133.3 dB A-weighted
@ 150 Ω source resistance -129 dB / 130.5 dB A-weighted
Frequency response
<10 Hz - 160 kHz -1 dB
<10 Hz - 200 kHz -3 dB
Gain range +10 dB to +60 dB
Max. input level +12 dBu @ +10 dB GAIN
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio 110 dB / 112 dB A-weighted (0 dBu In @
+22 dB GAIN)
Distortion (THD+N) 0.005 % / 0.004 % A-weighted
Line input
Type ¼" TRS jack, electronically balanced
Impedance approx. 20 kΩ balanced, approx. 10 kΩ
unbalanced
Gain range -10 dB to +40 dB
Max. input level +22 dBu @ 0 dB GAIN
Fade-out attenuation 2 (Crosstalk attenuation)
Main fader closed 90 dB
Channel muted 84 dB
Channel fader muted 85 dB
Frequency response (Mic In → Main Out)
<10 Hz - 90 kHz +0 dB / -1 dB
<10 Hz - 160 kHz +0 dB / -3 dB
Stereo inputs
Type 2 x ¼" TRS jack, balanced
Impedance approx. 20 kΩ balanced, 10 kΩ
unbalanced
Gain range -20 dB to +20 dB
Max. input level +22 dBu @ 0 dB GAIN
CD/Tape in
Type RCA connector
Impedance approx. 10 kΩ
Max. input level +22 dBu
Equalizer
EQ mono channels
LOW 80 Hz / ±15 dB
MID 100 Hz to 8 kHz / ±15 dB
HIGH 12 kHz / ±15 dB
LOW CUT 80 Hz, 18 dB/oct.
EQ stereo channels
LOW 80 Hz / ±15 dB
LOW MID 500 Hz / ±15 dB
HIGH MID 3 kHz / ±15 dB
HIGH 12 kHz / ±15 dB
Channel inserts
Type ¼" TRS jack, unbalanced
Max. input level +22 dBu
AUX/FX Send
Type ¼" mono jack, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
FX Returns
Type ¼" mono jack, unbalanced
Impedance approx. 10 kΩ
Max. input level +22 dBu
Subgroup outputs
Type ¼" mono jack, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Main outputs (XLR)
Type XLR connector, electronically balanced
Impedance approx. 240 Ω balanced, 120 Ω
unbalanced
Max. output level +28 dBu
Main outputs (¼")
Type ¼" TRS jack, electronically balanced
Impedance approx. 240 Ω balanced, 120 Ω
unbalanced
Max. output level +28 dBu
Main Inserts
Type ¼" TRS jack, unbalanced
Max. input level +22 dBu
Mono output
Type ¼" mono jack, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Low pass variable,30 Hz to 200 Hz, 18 dB/oct.
Phones/CTRL room output
Type ¼" TRS jack, unbalanced
Max. output level +19 dBu / 150 Ω (+25 dBm)
CD/Tape Out
Type RCA connector
Impedance approx. 1 kΩ
Max. output level +22 dBu
DSP
Type Texas Instruments
Converter 24-bit delta-sigma, 64/128-times
oversampling
Sampling rate 46 kHz
Main mix system data 3 (Noise)
Main mix @ -∞, channel fader @ -∞
-100 dB / -102.5 dB A-weighted
Main mix @ 0 dB, channel fader @ -∞
-82 dB / -85 dB A-weighted
Main mix @ 0 dB, channel fader @ 0 dB
-72 dB / -75 dB A-weighted
Power supply
Power consumption 50 W
Fuse (100 - 240 V~, 50/60 Hz) T 2,0 A H 250 V
Mains connector
Standard IEC receptacle
Physical/weight
SX3242FX
Dimensions (H x W x D) 3.9" x 35.3" x 16.1" (100 mm x 896 mm
x 410 mm)
Weight (net) 24.3 lbs (11.0 kg)
SX2442FX
Dimensions (H x W x D) 3.9" x 26.9" x 16.1" (100 mm x 682 mm
x 410 mm)
Weight (net) 19 lbs (8.6 kg)
1 Equivalent Input Noise
2 Measuring conditions: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output;
unity gain.
3 20 Hz - 20 kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all chan-
nels on main mix; channels 1/3 as far left as possible; channels 2/4 as far right as
possible; reference = +6 dBu.
BEHRINGER is constantly striving to maintain the highest professional standards.
As a result of these efforts, modifications may be made from time to time to existing
products without prior notice. Specifications and appearance may differ from those
listed or illustrated.