Behringer EURODESK SX2442FX - Manual (Page 13)

EURODESK SX3242FX/SX2442FX
Wiring examples 13
Live set-up 4.2
Wiring the console for live operation Fig. 4.2:
This example shows a classic live set-up. As in the studio example, four drum microphones, bass, keyboard (stereo channel), guitar
and two vocal microphones are connected. The four drum channels (kick drum, snare, overhead L, overhead R) are mixed down to
two subgroups and then routed to the main mix. This way, it is possible to conveniently control the volume of the entire drums in the
main mix with the two subgroup faders. The built-in compressor insert effect is used for the bass. The corresponding input channel is
separate from all buses and the bass signal is routed directly from the internal effects processor to the main mix bus. The MAIN/SUB
switch must not be pressed in this case and the position of the SUB 1/2 SUB 3/4 switch is irrelevant.