Belkin F5D8633-4 - Manual (Page 35)

33 32 33 32
Alternate Setup Method
se
ct
io
n
1
9
2
3
4
5
6
7
8
10
5. Internet-Status Indicator
This indicator is visible in all pages of the Router, indicating the connection
status of the Router. When the indicator says “Connected” in blue, the
Router is connected to the Internet. When the Router is not connected to
the Internet, the indicator will read “No Connection” in RED. The indicator
is automatically updated when you make changes to the settings of the
Router.
6. Connect/Disconnect Buttons
Use these buttons to manually connect or disconnect your ADSL
connection as needed.
7. Language
Shows the active language for the Advanced User Interface. Select a
desirable language by clicking one of the available languages.
8. Version Info
Shows the firmware version, boot-code version, hardware version, and
serial number of the Router.
9. LAN Settings
Shows you the settings of the Local Area Network (LAN) side of the Router.
Changes can be made to the settings by clicking on any one of the links
(IP Address, Subnet Mask, DHCP Server) or by clicking the “LAN” quick-
navigation link on the left side of the screen.
10. Internet Settings
Shows the settings of the Internet/WAN side of the Router that connects to
the Internet. Changes to any of these settings can be made by clicking on
the links or by clicking on the “Internet/WAN” quick-navigation link on the
left side of the screen.
11. Features
Shows the status of the Router’s NAT, firewall, and wireless features.
Changes can be made to the settings by clicking on any one of the links or
by clicking the quick-navigation links on the left side of the screen.
12. ADSL Info
Shows the ADSL status and transmission rates.
13. Page Name
The page you are on can be identified by this name. This User Manual will
sometimes refer to pages by name. For instance “LAN > LAN Settings”
refers to the “LAN Settings” page.