Belkin F5D8633-4 - Manual (Page 23)

21 20 21 20
Connecting and Configuring your Modem Router
se
ct
io
n
1
9
2
3
4
5
6
7
8
10
B. Locate the cable that connects
your old modem to your
computer. Unplug that cable from
your old modem, and plug it into
any yellow port labeled “to Wired
Computers” on the back of your
new Router.
C.
Locate the cable that connects
your old modem to the ADSL
wall jack. Unplug it from your old
modem and then connect it to the
gray port labeled “to ADSL” on
the back of your Router.
E.
Wait 20 seconds for the Router to
start up. Look at the display on
the front of the Router. Make sure
the “Wired” and “Modem-Router”
icons are lit in blue. If they are
not, recheck your connections.
D.
Plug your Router’s power supply
into the black port labeled
“Power” on the back of your
Router.