Barco D320PL - Manual (Page 23)

4. Input modules
Image 4-9
Image 4-10
Order info:
Article No. Description
R9850940 D320PL Digitizer YUV / RG(s)B input module
4.6 RGB analog input module
Technical info:
• Sub D15 connector for input and loop through.
• R, G, B, Hsync, Vsync : 0 to 1 Vpp ±3dB 75 Ohm termination.
• Black level : 300mV.
• Sync-tip : 0V
• Resolution : SXGA and UXGA version available.
• Amber LED (upper LED on the front side) will be lit indicating recognition of film, either continuous or
intermittent film detection.
• When placed in an input slot the green LED (lower LED on the front side) will be lit indicating that the
system acknowledges the module.
Image 4-11
Image 4-12
Order info:
Article No. Description
R9850950 D320PL Digitizer RGB analog SXGA input
module
R9851710 D320PL Digitizer RGB analog UXGA input
module
R5976470 D320PL DIGITIZER 13122002 19