beautypg.com

0 e4 system troubleshooting, 4 common problems, 1 communications port error – Bose FREESPACE E4 User Manual

Page 11: 2 no audio in zone

background image

68 of 80

8.0 E4 System Troubleshooting

8.4 Common problems

8.4.1 Communications port error

When you receive the communications port error dialog, the
FreeSpace

®

Installer™ software was not able to locate an E4

system on the COM 1 port.

This normally occurs due to one of three reasons:

• The PC and E4 are not connected via a “straight-wired” serial

cable.

• Another software application has control of the serial port.

Applications such as the Palm OS, or other audio applications
control the serial port while they are open. Close these applica-
tions and click the Try Again button.

• The E4 is connected to another communications port. If this is

the case you should select the appropriate COM port and click
the Try Again button.

Programmer’s Note: Before dismissing the “Choose
COM port” dialog, select the COM 2 port and click Try
Again
. Not doing this will cause the COM 1 port to be
locked.

8.4.2 No audio in zone

If the system is powered on and operational, but there is no
sound, check the following:

• Do the front panel LEDs indicate normal operation?

• Is the source operating?

• Is routing correct?

• Is output gain correct?

• Is the output gain muted?

• Is cabling correct?

No audio in zone.

Are the AUDIO

SOURCES indicators

green?

• Make sure that the audio sources

are connected to the E4 LINE in-
puts and that there is an input sig-
nal from the source.

• Using the Installer™ software,

check that the input gain is raised.

• Make sure the source is on.

No

Yes

The amplifier is in “protect” mode.
Disconnect the load and see if the
output indicator changes to green.
If so:

• Check for a short in the output

line,

• Make sure no small strands of

wire are touching other wires,

• Make sure speakers are function-

ing correctly, or

• Using a voltmeter, check for a

voltage drop in the power line
when amplifier is being driven ex-
cessively hard.

See amplifier fault troubleshooting
section for course of action.

Is AMP OUTPUT

indicator red?

Are the

AMP OUTPUTS

indicators green?

Contact Bose

Customer Service.

Yes

No

No

Yes