Behringer Ultra-Low Noise Design 12-Input 2/2-Bus Mixer with Premium Mic Preamplifiers UB1204-PRO User Manual
Page 14
14
EURORACK UB1204FX-PRO/UB1204-PRO User Manual
EQ Mono Channels
Low
80 Hz / ±15 dB
Mid
2.5 kHz / ±15 dB
High
12 kHz / ±15 dB
EQ Stereo Channels
Low
80 Hz / ±15 dB
Mid
2.5 kHz / ±15 dB
High
12 kHz / ±15 dB
Aux Sends
Type
1/4" TS connector, unbalanced
Impedance
approx. 120 Ω
Max. output level
+22 dBu
Stereo Aux Returns
Type
1/4" TRS connector,
electronically balanced
Impedance
approx. 20 kΩ bal. / 10 kΩ unbal.
Max. input level
+22 dBu
Main Outputs
Type
XLR, electronically balanced
Impedance
approx. 240 Ω bal. / 120 Ω unbal.
Max. output level
+28 dBu
Control Room Outputs
Type
1/4" TS connector, unbal.
Impedance
approx. 120 Ω
Max. output level
+22 dBu
Headphones Output
Type
1/4" TRS connector, unbalanced
Max. output level
+19 dBu / 150 Ω (+25 dBm)
DSP
24-bit Texas Instruments
Converter
24-bit Sigma-Delta,
64/128-times oversampling
Sampling rate
40 kHz
Main Mix System Data
2
Noise
Main mix @ -∞,
-105 dB / -108 dB A-weighted
Channel fader @ -∞
Main mix @ 0 dB,
-95 dB / -97 dB A-weighted
Channel fader @ -∞
Main mix @ 0 dB,
-82.5 dB / -85 dB A-weighted
Channel fader @ 0 dB
Power Supply
Mains voltage
100 to 240 V~, 50/60 Hz
Power consumption
40 W
Fuse
100 - 240 V ~: T 1.6 A H
Mains connection
Standard IEC receptacle
Physical
UB1204FX-PRO
Dimensions (H x W x D)
approx. 3 7/8 x 9 11/16 x 13 5/32"
approx. 97 x 247 x 334 mm
Weight (Net)
approx. 8.6 lbs / 3.9 kg
UB1204-PRO
Dimensions (H x W x D)
approx. 3 7/8 x 9 11/16 x 13"
approx. 97 x 247 x 328 mm
Weight (Net)
approx. 8.1 lbs / 3.7 kg
Measuring conditions:
1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2: 20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all channels on main mix;
channels 1/3 as far left as possible, channels 2/4 as far right as possible. Reference = +6 dBu.
BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.