Philips Wasserkocher - Manual (Page 14)

Environment
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 16).
guarantee & service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you find its phone number in the worldwide
guarantee leaflet). If there is no Customer Care Centre in your country,
go to your local Philips dealer or contact the Service Department of
Philips Domestic Appliances and Personal Care BV.
troubleshooting
Signal Meaning/solution
One temperature
light is continuously
on while the keep-
warm button and
on/off button are off.
After the water has reached the set
temperature, the light stays on for 120 seconds.
Two or more
temperature lights
flash rapidly at the
same time.
The water in the kettle has become more than
10°C hotter than the set temperature because:
- there is too little water in the kettle. To
prevent overheating, always fill the kettle with at
least 0.5 litres water.
- there is too much scale in the kettle. Descale
the kettle before you use it again (see chapter
‘Descaling’).
-
EnglisH 14