BUSH DAB + digital radio with touch control BR20DAB - Manual (Page 8)

BR20DAB
8
Switching On
To turn on the DAB+ Radio, ensure the power switch on the rear of the unit is set
to the ON position.
Press the STANDBY button on the touch panel.
To turn the DAB+ Radio off, press the STANDBY button again.
Progress bar
Number of stations found
Daily Use DAB+
1
2
3
1
2
1
2
1
2
3
3
Adjusting the Volume
To increase the volume, turn the volume control knob clockwise.
To decrease the volume, turn the volume control knob anti-clockwise.
You can also press the MUTE button to turn the sound off. To turn the sound
back on, press the MUTE button again.
BBS (Bass boost System) function
The bass sounds can be enhanced by selecting the bass boost system.
Press the BBS button to enhance the bass frequencies
To turn off the bass boost system, press the BBS button again.
Listening to the DAB+ Radio
Press the STANDBY button to turn the DAB+ Radio on.
The following screen will be displayed. A bar graph indicates the progress of the
initial search - the number of stations found increases as the scan progresses.
When the scan is complete, the DAB+ Radio will then select the first available
station. Stations are listed in numerical then alphabetic order. The station list is
retained in memory so the next time you switch the DAB+ Radio on, the station
search does not take place. If there are no stations found, check that you have
adequate DAB+ coverage in your area. You can find this out by visiting
www.digitalradio.com.au and using their online post code checker.
Please note: You should also run a full scan to make sure all stations are stored.