BUSH DAB + digital radio with touch control BR20DAB - Manual (Page 11)

BR20DAB
11
Changing the DAB+ Station Information
It is possible to change the information displayed on the second line of the display
when listening to a DAB+ station. There are nine types of information available as
listed below with examples to the right.
Dynamic Label Segment (DLS) - This is scrolling text
information supplied by the DAB+ station. It may
comprise information on music titles or details of the
programme.
Signal Bar - Shows the transmission signal level.
Program Type (PTY) - This is a description of the
type of programme provided by the DAB+ station.
Multiplex Name - This will show the multiplex that is
broadcasting the programme you are listening to.
Channel and Frequency - This displays the channel
number and the transmission frequency.
Signal Error Rate - If the transmission signal contains
any errors, the system will apply corrections.
The amount of signal corrections can be displayed as
a numerical value between 0 and 99. As the value
increases, you will hear the signal degrade.
To improve reception, try adjusting the position of the
antenna. Please note a signal error rate of 30 or more
will make the station inaudible.
Signal Information - This shows the digital bit-rate
and the signal mode.
Time - This shows the current time provided by the
broadcaster.
Date - This displays the date provided by the
broadcaster.
News
ABC DAB+
11C 220.352MHz
Signal error 1
80kbps Mono
Press DISPLAY Button
ABC National
DLS scrolling
ABC National
ABC National
ABC National
ABC National
ABC National
ABC National
Press DISPLAY Button
Press DISPLAY Button
Press DISPLAY Button
Press DISPLAY Button
Press DISPLAY Button
Press DISPLAY Button
Press DISPLAY Button
ABC National
Press DISPLAY Button
ABC National
Press DISPLAY Button
02/09/2009
12:38:33 AM
Daily Use DAB+
1
2
3
4
5
6
7
8
9