beautypg.com

Daily use dab – BUSH DAB + digital radio with touch control BR20DAB User Manual

Page 13

background image

BR20DAB

13

Dynamic Range Control (DRC)

DRC adds or removes a degree of compression to compensate for the differences in
the dynamic range between radio stations. For example, a station broadcasting
popular music may have a high level of compression applied since the emphasis is
on a constant high listening level. Where as a station broadcasting classical music
will have little or no compression as the listener requires all of the highs and lows in
the music to define the detail.
There are three levels of compression:

DRC off = No compression applied

DRC high = Maximum compression applied (this is the default)

DRC low = Low compression applied

The best way to determine which of these settings suits you best is to experiment
with them on a variety of source material.
Press

the

MENU Button to access the menu.

Rotate

the

SELECT Button until “DRC” is displayed.

Press

the

SELECT Button to confirm.

Rotate

the

SELECT Button to select between the three DRC values. The available

options appear on line 2 of the display. When the required DRC value is displayed

press

the

SELECT Button to confirm.

You should be able to hear the difference in compression immediately.

Station Prune

The Station Prune function allows you to remove stations from the station list that are
not active or cannot be received. These stations usually appear in the display with a "?".
Press

the

MENU Button to access the menu.

Rotate

the

SELECT Button until "Prune" is displayed.

Press

the

SELECT Button to confirm.

Rotate

the

SELECT Button to highlight either No or Yes

Press

the

SELECT Button. If you have chosen to prune the station list, the

unwanted stations will be deleted.

Daily Use DAB+

1

2

3

4

5

1

2

3

4

5

System Settings

To make adjustments to the settings on the DAB+ Radio:
Press

the

MENU Button to access the menu.

Rotate

the

SELECT Button until "System" is displayed.

Press

the

SELECT Button. The following options: Time, Backlight, Factory Reset

and Software (SW) version are available.

1

2

3