Bay Technical Associates DS2-RPC - Manual (Page 48)

DS-RPC OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
40
NOTE: This header may appear different depending on type of
module installed.
From the selection menu, select #1,
“Header,” followed by a carriage return .
The DS71 displays the current header status
and asks if you want to enable:
Header is......................... Disabled
Enable? (Y/N, CR for no change):
Type “Y“ for yes followed by if you
want to enable Header status. Type “N“ for
no followed by if you want to disable
Header. Enter for no change.
Password To change Password or Enable/Disable
Password upon login, select #2, “Password,”
from the selection menu, followed by .
Default Password is BTA, disabled. The
DS71 or DS71-MD2 module responds:
Change Password.....................1
Enable/Disable......................... 2
Exit.....................................…...X, CR
To change the current password, select #1,
“Change Password,” followed by . The
DS71 or DS71-MD2 module responds:
Enter New Password (1 - 8 char., CR to end):
Enter the new password up to 8 ASCII
characters followed by . The DS71 or
DS71-MD2 module stores the new password
in non-volatile memory and returns to the
selection menu.