Blaupunkt Santa Cruz CD31 - Manual (Page 16)

38
CD mode
You can use this unit to play standard
CDs with a diameter of 12 cm.
Risk of damage to the CD drive!
CD singles with a diameter of 8 cm
and contoured CDs (shape CDs) are
not suitable for playback in this unit.
We accept no liability for any dam-
age to the CD drive that may occur
as a result of the use of unsuitable
CDs.
Switching to CD mode
●
If there is no CD inserted in the
drive.
➮
Gently insert the CD with the print-
ed side uppermost into the CD
compartment until you feel some
resistance.
The CD will be drawn automatically into
the drive.
Do not use force when inserting the CD.
You must not hinder or assist the drive
as it draws in the CD.
CD playback begins.
●
If a CD is already inserted in the
drive.
➮
Keep pressing the CD•C button
7
until “CD” appears in the display.
Playback begins from the point at which
it was last interrupted.
Selecting tracks
➮
Press one of the / or / but-
tons
9
to select the next or previ-
ous track.
If you press the / button
9
once,
the current track will be played again
from the beginning.
Quick track selection
To quickly select tracks backwards or
forwards,
➮
keep one of the or buttons
9
pressed until fast-reverse / fast-for-
ward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
➮
keep one of the buttons
9
pressed until fast reversing / fast
forwarding begins.
Random play (MIX)
➮
Press button 4 (MIX)
;
.
MIX appears in the display. The next
randomly selected track will then be
played.
Stopping MIX
➮
Press button 4 (MIX)
;
again.
MIX disappears from the display.
Scanning tracks (SCAN)
You can briefly play all the tracks on a
CD.
➮
Press the SCAN button
4
.
Note:
●
You can set the scantime. For fur-
ther details, read the section enti-
tled “Setting the scantime” in the
“Radio mode” chapter.
CD MODE