Blaupunkt Santa Cruz CD31 - Manual (Page 11)

33
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
POR
TUGUÊS
Selecting the frequency range /
memory
This unit can receive programmes
broadcast over the FM, MW and LW fre-
quency ranges.
Note:
●
The MW and LW frequency ranges
are not available on the Konstanz
CD31.
There are three preset memory levels
for the FM range and one for each of
the MW and LW ranges. Five stations
can be stored on each memory level.
Selecting the memory level
To switch between the FM memory lev-
els and the MW and LW frequency rang-
es,
➮
keep pressing the FMT or BAND
(TS) button
2
until the required
frequency range / memory level is
displayed.
Tuning into a station
There are various ways of tuning into a
station.
Automatic seek tuning
➮
Press the or button
9
.
The unit tunes into the next receivable
station.
Setting the sensitivity of the
station search mode
You can configure the radio to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
➮
Press the MENU button
:
.
➮
Keep pressing the or button
9
until “SENS” appears in the dis-
play.
➮
Press the button
9
.
The display shows the currently set val-
ue for sensitivity. “SENS HI6” means that
the tuner is highly sensitive. “SENS LO1”
means it is set to the lowest sensitivity
setting.
If “SENS LO” is selected, “lo” lights up
in the display.
➮
Set the required sensitivity using
the and buttons
9
.
➮
Press the MENU button
:
.
Tuning into stations manually
You can also tune into stations manual-
ly.
Note:
●
You can only tune into stations
manually if the RDS function is de-
activated.
➮
Press the or button
9
.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called “broadcasting
network”.
RADIO MODE