Auxiliary input jack, Troubleshootina guide – Blaupunkt CR148 User Manual
Page 16
Auxiliary Input Jack
Connect other audio equipment, such as a portable CD or DAT player, through the 1.2
mm
pigtail connector. Access auxiliary equipment output by pressing
until
appears. Adjust
volume, bass, and treble settings through head unit.
Troubleshootina Guide
The following check will assist in the correction of most problems which you may encounter with your
unit. Before going through the check list below, refer back to the connection and operating procedures.
General
No sound.
Trouble
Cause/Solution
l
Adjust the volume with the + button.
l
With a two-speaker system set the fader control to the center
position.
Radio reception
Trouble
Preset stations are not receivable.
Automatic tuning is not possible.
Travelstore feature does not complete
storing of six stations.
Cause/Solution*
l
The broadcast is too weak.
l
The broadcast is too weak.
Use manual tuning.
l
Not enough broadcast frequencies are receivable.
l
Also make sure that antenna is connected, extended and dry inside.
If the
mentioned solutions do not help to improve the situation, consult
call l-800-266-2528.
your nearest Blaupunkt dealer or in the United States
16