Buhler Allied FK330 - Manual (Page 7)

96” Allied Snowblower
OPERATING INSTRUCTIONS – cont’d
11. Shear Sprocket: The shear sprocket (#24) should be checked at the
beginning of every season to make sure it will spin freely. With time this
sprocket could corrode and seize which will not allow the shear bolt to
break if something jams in the snowblower auger. Clean to loosen if
necessary.
12. When replacing bearings or tightening a loose bearing collar, always
tighten collar in the direction of shaft rotation using a center punch or a
similar tool.
4