Buhler Allied FK330 - Manual (Page 5)

96” Allied Snowblower
SNOWBLOWER
This manual is for 96" Allied Snowblower with a quick coupling hitch. With this hitch, the
blower can be mounted on a tractor with either a quick hitch or the standard three-point
hitch. All 96" Allied snowblowers have a sealed oil bath gearbox. The snowblower is
the push type and will mount to a tractor with 540 rpm PTO. It is supplied with category
2 pins with conversion bushings to category 3 available. This 96" wide snowblower
comes with hydraulic chute control as standard equipment. A hand crank chute control
is available. There is a shear bolt on the auger and on the PTO shaft to protect the
machine from damage if a large object is picked up. Any smaller objects in the snow
will be thrown with it and could cause serious injury. Do not let anyone stand behind the
tractor in the area of the discharged snow.
Replace safety signs immediately
should they become damaged, torn or
illegible. Obtain replacements from your
authorized dealer using the part
numbers shown.
#1
#3 #2
2