Brinkmann Vertical Smoker Charcoal/Wood Smoker Grill - Manual (Page 5)

4
Choose a good, cleared assembly area and get a
friend to help you put your smoker together.
Carefully remove all components from Smoker Box.
Lay cardboard down to protect smoker finish and
assembly area.
Step 1
Attach the smoker box handle by inserting the
handle through the hole in smoker box door.
Place the handle spring and washer onto the
handle. Compress the spring and washer to the
door and insert the cotter pin to secure.
WARNING: Use caution when lifting or moving
smoker to prevent strains and back
injuries. Moving smoker may require
the help of an additional person.
NOTE: With the help of a friend, turn the smoker
box with legs upside down. Make sure door
is securely latched to avoid injury.
Step 2
Attach a locking caster to the bottom of each
leg. Screw into holes and tighten with an
adjustable wrench.
Locking Caster
Smoker Box Leg
300 200 100 50
400 500 600 700
Smoker Box
Handle
Smoker Box
Door
Cotter Pin
Spring
Washer
OM_810-5500-0_VertSmoker.qxd 11/18/02 5:51 PM Page 5