BT FALCON 8375 - Manual (Page 31)

Option –
Relative time
5. Press
OK
soft key to confirm. Press the key then press the
Edit
soft key.
6. Enter the number of days, hours and minutes, using the keypad, that you require Do Not Disturb
to be active (e.g. 00, 00:10 will keep Do Not Disturb on for 10 minutes then the service will
automatically turn off).
7. Press
OK
soft key to confirm. The idle screen displays DNDst:00, 00:10 (R) and the day, hour,
minute will decline until they reach zero.
Option –
Absolute time
8. Press
OK
soft key to confirm. Press the key then press the
Edit
soft key.
9. Enter the time, using the keypad, that you require Do Not Disturb to be deactivated
(e.g. 17:10 will automatically turn off Do Not Disturb at ten past five).
10. Press
OK
soft key to confirm. The idle screen displays
DNDst:17:10 (A)
Phone Lock
By turning on Phone Lock no calls can be made from your BT Falcon. When a call is attempted the
display will show
Wrong Number!
Phone Lock can be password protected and will require a PIN to
set and clear (see Setting the password to lock the phone, page 38).
1. Press the key,
Option
soft key, key six times to
PhoneLock
then the
Change
soft key.
2. If password protected, enter your password/PIN (default is 0000) and press
OK
soft key.
3. Each press of the
Change
soft key turns the service on and off.
Using the phone 31
BT Falcon UG – Issue 2 – Edition 02 – 12.09.07 – 8375
If you experience any problems, please call the Helpline on 0800 169 1146 or go to www.bt.com/business/broadbandvoice
8375 Falcon UG Issue 2 [2] 12/9/07 15:30 Page 31