Philips SHAVER Series 9000 Nass- und Trockenrasierer - Manual (Page 34)

Problem Possible cause Solution
An exclamation
mark, replacement
reminder and the
cleaning reminder
have suddenly
appeared on the
display.
The shaving heads are
soiled or damaged.
Replace (see chapter
‘Replacement’) or clean the
shaving heads (see chapter
‘Cleaning and maintenance’).
Water is leaking
from the bottom
of the shaver.
During cleaning, water
may collect between
the inner body and the
outer shell of the shaver.
This is normal and not
dangerous because all
electronics are enclosed in a
sealed power unit inside the
shaver.
The SmartClean
system does not
work when I press
the on/off button.
The SmartClean system
is not connected to the
mains.
Put the small plug in
SmartClean system and put the
adapter in the wall socket.
The shaver is
not entirely clean
after I clean it in
the SmartClean
system.
You have not
placed the shaver in
the SmartClean
system properly, so
there is no electrical
connection between
the SmartClean system
and the shaver.
Press down the top cap (‘click’)
to ensure a proper connection
between the shaver and the
SmartClean system.
The cleaning cartridge
needs replacement.
Replace the cleaning cartridge
(see chapter ‘Cleaning and
maintenance’).
The cleaning cartridge is
empty.The replacement
symbol flashes to
indicate you have to
replace the cleaning
cartridge.
Place a new cleaning cartridge
in the SmartClean system
(see chapter ‘Cleaning and
maintenance’).
ENGLISH 34