English – Philips SHAVER Series 9000 Nass- und Trockenrasierer User Manual
Page 33
Problem
Possible cause
Solution
The shaver does
not work when I
press the on/off
button.
The shaver it still
attached to the mains.
For safety reasons, the
shaver can only be used
cordlessly.
Unplug the shaver and press
the on/off button to switch on
the shaver.
The rechargeable
battery is empty.
Recharge the battery
(see chapter ‘Charging’).
The travel lock
is activated.
Press the on/off button for
3 seconds to deactivate the
travel lock.
The shaver does
not shave as well
as it used to.
The shaving heads are
damaged or worn.
Replace the shaving heads
(see chapter ‘Replacement’).
Hairs or dirt obstruct
the shaving heads.
Clean the shaving heads
(see chapter ‘Cleaning and
maintenance’).
Clean the shaver thoroughly
before you continue shaving
(see chapter ‘Cleaning and
maintenance’).
I replaced the
shaving heads, but
the replacement
reminder is still
showing.
You have not reset the
shaver.
Reset the shaver by pressing
the on/off button for approx.
7 seconds (see chapter
‘Replacement’).
A shaving head
symbol has
suddenly appeared
on the display.
This symbol is a
replacement reminder.
Replace the shaving heads
(see chapter ‘Replacement’).
An exclamation
mark has suddenly
appeared on
the display while
charging.
The shaver is
overheated.
Disconnect the shaver from
the mains for approx.
10 minutes.
ENGLISH
33