Philips SHAVER Series 9000 Nass- und Trockenrasierer - Manual (Page 23)

1 Put the small plug in the back of the SmartClean
system.
2 Put the adapter in the wall socket.
3 Press the button on the side of the SmartClean
system (1) and lift the top part of the SmartClean
system (2).
4 Pull the seal off the cleaning cartridge.
5 Place the cleaning cartridge in the SmartClean
system.
6 Push the top part of the SmartClean system back
down (‘click’).
Using the SmartClean system
Always make sure to shake excess water off the shaver
before you place it in the SmartClean.
ENGLISH 23