Router table assembly, Installing the fence – Bosch RA1181 User Manual

Page 17

Text mode
Original mode

Router Table Assembly

ATTACHING THE FENCE TO THE TABLE
(Fig. 12)

1. From underneath the table, slide two 1/4-20 x 1

⁄

″

carriage bolts (31) up through the slots in the tabletop
and the holes in the bottom of the fence. Slide a
washer (27) onto each bolt and loosely attach a
large clamping knob (14) onto each bolt.

2. Make sure that the fence assembly slides smoothly

from front to back.

NOTE: Use the scale on the tabletop as a guide
when aligning the fence for routing operations. Once
the fence is positioned and aligned correctly, tighten
the clamping knobs SECURELY.

INSTALLING THE FENCE

FIG. 12