beautypg.com

Blaupunkt HAMBURG MP57 User Manual

Page 49

background image

110

User settings

Adjust the desired volume with the rock-
er switch or

=

(levels 0 to 66).

Notes:
The volume preset by you will not be
used,

if the volume currently listened to is
lower than the set mute level. In this
case, traffi c announcements are re-
produced with the volume listened to.

if the volume currently listened to is
higher than the set TEL volume. In
this case, phone calls/navigation an-
nouncements are reproduced with
the volume listened to.

if the volume currently listened to is
higher than the set TA volume. In this
case, traffi c announcements are re-
produced with the volume listened to.

Activating/deactivating the signal tone
(BEEP ON/OFF)

You can deactivate the signal tone that
sounds as a confi rmation in the menus or
when storing the stations on the station but-
tons.

In the Volume menu, press the rock-
er switch or

=

repeatedly until

"BEEP ON/OFF" is displayed.

Switch between the settings with the
rocker switch or

:

.

"BEEP OFF" (signal tone off)

"BEEP ON " (signal tone on)

u

u

u


Setting the speed-dependent volume
increase (AUTO SOUND )

When you are driving faster, the device can
automatically increase the volume to com-
pensate for the driving noise. The volume is
increased depending upon the speed. In or-
der for this to work, the speedometer signal
must be connected as described in the in-
stallation instructions.

The optimum setting for this volume in-
crease depends on how noise levels devel-
op in your particular vehicle. Try the setting
that is perfect for your vehicle. You can se-
lect a value between 0 (no increase) and
max. 5.

In the Volume menu, press the rock-
er switch or

=

repeatedly until

"AUTO SOUND" is displayed.

Press the rocker switch

:

to display

the setting.

Set the desired value with the rocker
switch or

=

.

u

u

u

02_BA_Hamburg_gb.indd 110

02_BA_Hamburg_gb.indd 110

26.03.2007 11:34:10 Uhr

26.03.2007 11:34:10 Uhr