Tuning into a station – Blaupunkt HAMBURG MP57 User Manual

Page 22

Tuner mode

GLISH

DEUT

SCH

FRAN

AIS

ALIAN

NEDERLANDS

VENSKA

each. The FM waveband features 3 memory
banks each with 5 memory locations each:
FM1, FM2 and FMT .

In the "TUNER" menu, press the

BAND

button

to switch between the wave-

bands or memory banks:

FM1

FMT

FM2

You can now perform the following actions
in this waveband/memory bank :

Tuning into a station

Storing stations

Tuning into a station

There are three ways of tuning into a sta-
tion:

Tuning into stations automatically (sta-
tion seek tuning)

Tuning into stations manually

Selecting stored stations

Station seek tuning

Press the rocker switch or

If you press and hold the rocker switch

, automatic seek tuning skips

the stations found until you release the
rocker switch again.

The tuner searches for the next receiva-
ble station in the current waveband. The
adjusted sensitivity of the station seek
tuning (section "Changing the seek tun-

•
•

•

•
•

ing sensitivity") and your settings are
taken into consideration:

The "PTY ON" setting in the "TUNER"
menu: The tuner searches for stations
that are broadcasting the deﬁ ned
programme type.

Setting

(

TRAF button

;

press

short): The tuner sets only trafﬁ c in-
formation stations.

Note:
These settings are available only for FM.
An exact description of these settings
can be found in the following sections of
this chapter.

Tuning into stations manually

Notes:

Tuning into stations manually is pos-
sible only if the convenient RDS func-
tion is deactivated.

If you activated the "RDS ON" setting
(

TRAF button

;

press long), you

can scroll through broadcasting net-
works that have previously been re-
ceived with this device.

To change the frequency in increments of
100 kHz:

Press the rocker switch or

Selecting stored stations

Select the desired waveband or memo-
ry bank with the

BAND button

Press one of the station buttons

•

02_BA_Hamburg_gb.indd 83

26.03.2007 11:34:03 Uhr