Correcting keystone, Correcting, For k – BenQ W100 User Manual
Page 25
25
Operation
Correcting keystone
Keystoning refers to the situation where the projected image is
noticeably wider at either the top or bottom. It occurs when the
projector is not perpendicular to the screen.
To correct this, besides adjusting the projecting angle of the
projector, you will need to manually correct it following ONE of
these steps.
• Press
/
or
/
on the projector to display the status
bar labelled Keystone. Press
/
to correct keystoning at the
top of the image. Press
/
to correct keystoning at the
bottom of the image.
• Press
or
on the remote control to display the status bar labelled Keystone, then press
to correct
keystoning at the top of the image or press
to correct keystoning at the bottom of the image.
• Press
MENU on the projector or MENU on the remote control. Go to
Picture > Keystone and
adjust the values by pressing
/
/
/
on the projector or
Left/
Right on the remote control.
For example,
C
T
C
0
Keystone
-6
Keystone
0
Keystone
+6
Keystone
•
Press
/
on the projector or
•
Press
on the remote control or
•
Press
/
on the projector or
Left on the
remote control when you are in the Picture -->
Keystone menu.
•
Press
/
on the projector or
•
Press
on the remote control or
•
Press
/
on the projector or
Right on the
remote control when you are in the Picture -->
Keystone menu.