Save these instructions, Important safety instructions, Special safety instructions – Bravetti PLATINUM PRO F1100H User Manual
Page 3: For household use only, Operating instructions

SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
• A short power supply cord is provided to
reduce the risk resulting from becoming
entangled in or tripping over a longer
cord. An extension cord (or longer
detachable cord) is not recommended
for use with deep fryers.
• Never plug in the control panel before it
is installed in the body of the fryer with
the heating element inside the oil
container.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
SPECIAL SAFETY INSTRUCTIONS
• Do not immerse the control panel and
heating element in water.
• When opening the lid after frying, first
release the lid by pushing the latch with
your finger, then wait a moment to allow
the steam inside to escape before
opening fully.
• To avoid a circuit overload, do not
operate another high wattage appliance
on the same circuit.
Rev. 02/05A
1
1.
Read all instructions for use carefully
and look at the illustrations before you
start using the appliance.
2.
Do not touch hot surfaces, always use
handles or knobs.
3.
To protect against electrical shock, do
not immerse cord and plug of this
appliance in water or other liquids.
4.
Close supervision is necessary when
any appliance is used by or near
children.
5.
Unplug from outlet when not in use
and before cleaning. Allow to cool
before putting on or taking off parts
and before cleaning the appliance.
6.
Do not operate any appliance with a
damaged cord or plug, or after the
appliance malfunctions, has been
dropped or damaged in any manner.
Return the appliance to EURO-PRO
Operating LLC for examination, repair
or adjustment. See warranty.
7.
Never plug in before the control panel
is installed in the body of the fryer and
the heating element is placed in the oil
container.
8.
Never overfill the fryer with oil. Fill
only between the minimum and
maximum levels, as indicated inside
the oil container.
9.
Be sure handle is properly assembled
to the basket and locked in place.
See detailed assembly instructions.
10. The use of accessory attachments not
recommended by the appliance
manufacturer may cause injuries.
11. Always insert heating element in the
appliance first, then plug into the wall
outlet. To disconnect, remove plug
from wall outlet then wait for the unit
to cool completely before removing
the heating element.
12. Extreme caution must be used when
moving any appliance containing hot
oil or other hot liquids.
13. Do not leave appliance unattended
while in use.
14. Do not use outdoors.
15. Do not let cord hang over the edge of
the table, counter or touch hot
surfaces.
16. Do not place on or near a hot gas or
electric burner, or in a heated oven.
17. Do not use appliance for other than
intended household use.
POLARIZED PLUG
WARNING: To reduce the risk of electric shock, this appliance has a
polarized plug (one blade is wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not modify the plug in any way.
OPERATING INSTRUCTIONS
• Make sure the deep fryer is unplugged
and the oil has cooled before cleaning
or storing the deep fryer.
• The oil does not need to be changed
after each use. In general, the oil will
be tainted rather quickly when frying
food containing a lot of protein (such
as poultry, meat or fish). When oil is
mainly used to fry potatoes and is
filtered after each use, it can be used 8
to 10 times. However, do not use the
same oil for longer than 6 months.
• To filter the oil first make sure the oil
has cooled and then empty the oil from
the oil container into another container
or bottle. (Fig. 8) Wash and dry the oil
container and basket. Refill the oil
container with the oil, pouring the oil
through a wire strainer or paper filter.
(Fig. 9)
Fig. 8
Fig. 9
Filtering & Changing The Oil
8
Detachable Power Cord
Warning:
Always remove the plug from
the wall socket before cleaning. Allow the
deep fryer and the oil to cool completely
(approximately 2 hours) before cleaning.
Never immerse the control panel, cord or
plug in water or any other liquid.
• Follow the cleaning instructions on
page 4.
• Never immerse the control panel, cord
or plug in water or any other liquid.
• Do not place the control panel, cord or
plug in the dishwasher.
• Clean the control panel only with a
damp cloth.
• The oil container and frying baskets can
be washed in the top rack of
dishwasher.
• The deep fryer cover can also be
washed in the dishwasher after you
have removed the filter.
• The filter can be rinsed. Do not place in
dishwasher.
• The body of the deep fryer can be
washed in warm soapy water. Do not
put the body of the deep fryer in the
dishwasher.
Cleaning Instructions
Your deep fryer has been specifically
designed with your safety in mind. Your
deep fryer has incorporated a unique
detachable power supply cord. This
power supply cord cord is designed to
“Break Away” from the fryer body in the
event that the supply cord is
inadvertently pulled. This is intended to
prevent the tipping of the appliance and
hazardous spillage of hot oil.
The female receptacle portion of the
power supply cord is permanently
attached to the rear of the the control
panel.
To connect the male power cord plug to
the female receptacle on the appliance,
orient the male plug so that it mates
with the female receptacle. The male
plug can only be inserted one way. If
the male plug will not go into the
receptacle on the appliance, rotate the
male plug 180°.
IMPORTANT: Should the male plug
become detached from the appliance
during use, it is important to:
1. Unplug the power cord from the wall
outlet. (Fig. 10)
2. Turn off the
appliance at the
control panel.
3. Re-attach the
power cord to
the appliance.
4. Re-connect to
electrical outlet.
5. Turn the appliance back on.
Fig. 10
How To Reset Deep Fryer
Reset Button
Fig. 11
If for some reason your deep fryer stops
heating, the reason might be that the
safety reset switch has disconnected. To
re-start the deep fryer, follow the
instruction below:
• Using the back end
of a pen, push the
re-set button that
is located on
the back of the
control panel. The
deep fryer will beep to
indicate that it has been re-set.
(Fig. 11)