Bosch MSM 5000 UC - Manual (Page 11)

11
1. Remove the motor unit from the attachment.
2. Rotate the attachment in an antiĆclockwise
direction and remove from the universal cutter.
d WARNING d
Risk of injury from sharp blades!
Rotating drive!
Never grip the blades in the universal
cutter.
3. Take hold of the cutting blade by the plastic handle
and remove it.
4. Then remove the food.
Note: Always switch off the universal cutter before
taking it out of the food.
d CAUTION d
Never immerse the universal cutter
attachment in water and do not clean
in the dishwasher.
Never clean the cutting blade with bare
hands. Use a brush.
Do not use a steam cleaner!
Take hold of the cutting blade by the
plastic handle only.
Note: Do not use abrasive cleaning agents as these
will damage the surfaces.
1. Pull out the power plug.
2. Wipe the motor unit with a damp cloth and then
wipe dry.
3. Take hold of the cutting blade by the plastic handle
and remove it.
4. Universal cutter and cutting blade are
dishwasherĆproof.
5. Wipe the attachment with a damp cloth only.
After using
universal cutter
Cleaning universal
cutter