Liebherr LTC 1045-3.1 - Manual (Page 18)

Liebherr-Werk Ehingen GmbH
Postfach 1361, 89582 Ehingen, Germany
 +49 7391 502-0, Fax +49 7391 502-33 99
www.liebherr.com, E-Mail: [email protected]
PN 142.01.E07.2012 The illustrations contain also accessories and special equipment which are not included in the standard scope of delivery. Subject to alteration.
LICCON2 – safe and comfortable
Colour monitor
The readability of the data on
the monitor of the LICCON2
control in the superstructure
cab is improved by the colour
display. Warnings and the
crane utilization are easier
detectable.
Wireless remote control
(option)
All crane motions can be controlled
outside of the cab.
• Higher efficiency
• Free view and closeness to the load
• Prevention of communication errors
between the crane driver and the job
site personnel
Attaching and
detaching of
the hook block
The BTT – Bluetooth Ter-
minal offers the crane
driver the possibility
to attach or detach
the hook block at
the front of the vehicle
within sight, as the hoist
winch and the luffing cylinder
of the telescopic boom are remote
controlled.
Touch displays
Below the joysticks, inte-
grated in the armrests, touch
displays are installed by
which the various operation
functions can be selected.
Beside others this are the
supporting of the crane and
the adjustment of the working
flood light as well as the heat-
ing and climate regulation.
Crane supporting
With the BTT the crane is supported
comfortably and safely. Engine start/
stop and speed regulation, electronic
inclination display and automatic sup-
port levelling are provided as standard.
Optionally also the support forces can
be displayed on the BTT.
Wireless remote control