Liebherr R 974 C Litronic High Rise - Manual (Page 7)

Lift Capacities
with Industrial-Type Gooseneck Boom 12.00 m
R 974 C Litronic High Rise 7
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities
are valid for 750 mm flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity
(indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load
hook.
According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load dia-
gram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.
Industrial Stick 9.00 m
4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m 22.5 m 24.0 m 25.5 m
Under-
m carriage m
28.5 HR
27.0 HR
25.5 HR
24.0 HR
22.5 HR
21.0 HR
19.5 HR
18.0 HR
16.5 HR
15.0 HR
13.5 HR
12.0 HR
10.5 HR
9.0 HR
7.5 HR
6.0 HR
4.5 HR
3.0 HR
1.5 HR
0 HR
– 1.5 HR
– 3.0 HR
– 4.5 HR
– 6.0 HR
– 7.5 HR
– 9.0 HR
– 10.5 HR
11.3* 11.3* 11.94
11.4* 11.4* 10.3* 10.3* 13.87
12.0* 12.0* 10.9* 10.9* 9.6* 9.6* 15.40
11.5* 11.5* 9.7* 9.7* 9.2* 9.2* 16.65
11.4* 11.4* 11.2* 11.2* 8.9* 8.9* 17.68
11.9* 11.9* 11.5* 11.5* 11.2* 11.2* 10.7* 10.7* 8.7* 8.7* 18.53
12.2* 12.2* 11.7* 11.7* 11.3* 11.3* 11.0* 11.0* 8.6* 8.6* 19.21
12.6* 12.6* 12.0* 12.0* 11.5* 11.5* 11.1* 11.1* 9.7* 9.7* 8.5* 8.5* 19.76
14.2* 14.2* 13.2* 13.2* 12.4* 12.4* 11.8* 11.8* 11.3* 11.3* 10.9* 10.9* 8.6* 8.6* 20.18
19.0* 19.0* 16.8* 16.8* 15.2* 15.2* 13.9* 13.9* 12.9* 12.9* 12.1* 12.1* 11.5* 11.5* 11.0* 11.0* 8.6* 8.6* 20.47
32.2* 32.2* 25.2* 25.2* 21.0* 21.0* 18.2* 18.2* 16.2* 16.2* 14.6* 14.6* 13.5* 13.5* 12.5* 12.5* 11.8* 11.8* 11.2* 11.2* 8.8* 8.8* 20.65
18.5* 18.5* 28.3* 28.3* 23.1* 23.1* 19.6* 19.6* 17.2* 17.2* 15.4* 15.4* 14.0* 14.0* 13.0* 13.0* 12.1* 12.1* 11.4* 11.4* 9.0* 9.0* 20.72
10.6* 10.6* 28.4* 28.4* 24.9* 24.9* 20.9* 20.9* 18.1* 18.1* 16.1* 16.1* 14.6* 14.6* 13.3* 13.3* 12.4* 12.4* 11.5* 11.5* 9.3* 9.3* 20.68
4.2* 4.2* 9.6* 9.6* 19.9* 19.9* 26.3* 26.3* 22.0* 22.0* 19.0* 19.0* 16.7* 16.7* 15.0* 15.0* 13.7* 13.7* 12.6* 12.6* 11.6* 11.6* 9.6* 9.6* 20.52
6.0* 6.0* 10.2* 10.2* 17.8* 17.8* 27.3* 27.3* 22.8* 22.8* 19.6* 19.6* 17.2* 17.2* 15.4* 15.4* 13.9* 13.9* 12.7* 12.7* 11.6* 11.6* 10.1* 10.1* 20.25
7.9* 7.9* 11.5* 11.5* 17.7* 17.7* 27.7* 27.7* 23.3* 23.3* 20.0* 20.0* 17.5* 17.5* 15.6* 15.6* 14.1* 14.1* 12.7* 12.7* 11.4* 11.4* 10.6* 10.6* 19.86
9.9* 9.9* 13.1* 13.1* 18.6* 18.6* 27.7* 27.7* 23.4* 23.4* 20.1* 20.1* 17.6* 17.6* 15.6* 15.6* 14.0* 14.0* 12.5* 12.5* 11.1* 11.1* 19.34
11.7* 11.7* 14.8* 14.8* 19.9* 19.9* 27.2* 27.2* 23.1* 23.1* 19.9* 19.9* 17.4* 17.4* 15.4* 15.4* 13.7* 13.7* 12.0* 12.0* 11.1* 11.1* 18.69
16.5* 16.5* 21.6* 21.6* 26.1* 26.1* 22.3* 22.3* 19.3* 19.3* 16.9* 16.9* 14.8* 14.8* 13.0* 13.0* 11.1* 11.1* 17.88
23.7* 23.7* 24.4* 24.4* 21.0* 21.0* 18.2* 18.2* 15.8* 15.8* 13.7* 13.7* 12.0* 12.0* 16.22