Liebherr WTes 1753 Vinidor - Manual (Page 7)

19
GB
Additional functions
In set-up mode you can set the child-proof lock and adjust the brightness of the dis-
play. The child-proof lock is designed to protect the appliance from being switched off
accidentally by children.
Activating set-up mode:
• Press fan button for approx. 5 secs
- the fan button flashes - the display
shows
c for child-proof lock.
Note: the value to be altered flashes.
• Select the required function by press-
ing the Up/Down button:
c = child-proof lock, h = brightness of the display
• Now select/acknowledge function by pressing fan button briefly:
> For
c = child-proof lock,
press the Up/Down button to select
c1 = child-proof lock on or
c0 = child-proof lock off and acknowledge with the fan button.
When the symbol is lit, the child-proof lock is activated.
> For h = brightness, press Up/Down button to select
h1= minimum to
h5 = maximum brightness and acknowledge with fan button.
Exit set-up mode:
• Exit the set-up mode by pressing the On/Off button; after 2 min.
the electronic system switches over automatically. The normal
operating mode is activated again.
Audible warning signal
The audible warning signal helps to protect your wines against excessive temperature
fluctuations.
- It sounds when the door has been left open for longer than about 60
seconds. The audible warning device is switched off by pressing the
"
Alarm" button.
- It sounds when the interior gets too warm or too cold. The tempera-
ture display will also flash. The audible warning device is switched
off by pressing the "
Alarm" button. The temperature display will con-
tinue to flash until the cause of the alarm has been rectified.