Liebherr LH 80 C Litronic - Manual (Page 37)

37 Special timber handling machines from Liebherr
Uppercarriage
Handrails, anti-slip coverings •
Engine cover flap with gas strut and mechanical stop •
Motor connection housing with active safety •
Sound insulation •
Maintenance-free parking brake in swivelling mechanism •
Lockable tool compartment •
Tool kit •
Alternative voltage to 400 V +
Wide exterior platform and railing +
Extended safety access to machine +
Frequency 60 Hz +
Pedal-operated positioning swivel brake +
Special paint +
Driver's cab
Automatic climate control with de-icing system •
Operating hours indicator, visible from outside •
Skylight and windscreen made with laminated glass •
Installation device for radio •
Driver's seat can be adjusted independently or together with control consoles
(6-way adjustment)
•
Enclosed stowage compartment •
Glove compartment •
Removable foot mat •
Interior mirror •
Cab lighting •
Cab safety roof •
Coat hook •
Multifunction display •
Emergency exit via rear window •
Panoramic window with tinted glass •
Right window without centre post •
Roller blind •
Sliding window in door •
Seat belt •
Wash/wipe system •
Cigarette lighter and ashtray •
Fire extinguisher +
Windscreen made from reinforced glass (cannot be replaced) +
Electric coolbox +
Pneumatic driver's seat with head restraint and heating system +
Rotating beacon +
Windshield wiper for skylight +
Windshield wiper for lower windscreen +
Stone impact protection FOPS +
Stereo radio +
Auxiliary heater +
Auxiliary headlights on cab roof (front/rear) +
Hydraulic
shut-off valve between hydraulics tank and pumps •
Pressure cut-off •
Pressure test connections for hydraulics system •
Pressure accumulator for controlled lowering of equipment with engine switched off •
Electronic maximum load control •
Filter with integrated ultra-fine filter section (5 µm) •
Mode switch with stepless intermediate position •
Filled with eco-friendly oils +
Partial flow filter +
Tool control +
Auxiliary hydraulics +
Equipment
Sealed storage compartments •
Working lights •
Hydraulic connections for quick coupling •
Hydraulic line for supply to loose-material/multi-tine grapples
in tilt cylinder
•
Pipe anti-burst protection for lift cylinder with regeneration •
Pipe anti-burst protection for arm cylinder with regeneration •
Semi-automatic Liebherr central lubrication •
Cylinder end position damper •
Automatic Liebherr central lubrication +
Load hooks +
Liebherr equipment loose-material/multi-tine grapples +
Special paint +
Overload warning device +
• = standard, + = optional
Non-brand equipment and attachments may not
be installed or fitted without Liebherr's
approval.
Equipment