Liebherr LH 80 C Litronic - Manual (Page 15)

L0051
K F max.
J
H
L
F 45
20º
45º
F 20
A 20
A 45
C
C 1
B
E
Q
20º
I
15 Special timber handling machines from Liebherr
Attachment
Log Grapple
Log Grapple L 550 L 556 L 566 L 576 L 580
Geometry
A20 Discharge height at 20° mm
A45 Discharge height at 45° mm
B Manipulation height mm
C Max. grapple opening in loading position mm
C1 Max. grapple opening mm
E Max height mm
F20 Reach at max. lifting height at 20° discharge mm
F45 Reach at max. lifting height at 45° discharge mm
F max. Max. reach mm
H Height above cab mm
I Height above exhaust mm
J Ground clearance mm
K Wheelbase mm
L Overall length mm
Width over tyres mm
Q Grapple diameter m 2
Grapple width mm
Payload * kg
Operating weight * kg
Tyre sizes
* The figures shown include the above tyres, all lubricants, a full fuel tank, the ROPS/FOPS cab and the operator. Different tyres and optional
equipment will change the operating weight and payload. (Tipping load, articulated at 40° according to ISO 14397-1)
IND = Industrial lift arm with parallel guidance including hydraulic quick-hitch
IND IND IND IND IND
3,590 3,570 3,570 3,570 3,520
3,020 2,950 2,930 2,930 2,805
4,530 4,530 5,125 5,125 5,125
2,395 2,740 2,650 2,650 2,930
2,590 2,990 3,050 3,050 3,340
6,320 6,480 7,400 7,400 7,500
1,740 1,890 2,165 2,165 2,215
1,410 1,530 1,620 1,620 1,625
2,670 2,820 3,110 3,110 3,160
3,360 3,360 3,590 3,590 3,590
3,015 3,015 3,000 3,000 3,000
490 490 535 535 535
3,305 3,305 3,780 3,780 3,900
8,550 8,700 9,880 9,880 10,050
2,650 2,650 2,970 2,970 2,970
1.8 2.4 3.1 3.1 3.5
1,600 1,600 1,800 1,800 1,800
6,300 6,400 8,200 8,650 9,200
18,490 19,350 25,640 26,900 27,670
23.5R25 L3 23.5R25 L3 26.5R25 L3 26.5R25 L3 26.5R25 L3